Rode VideoMic X

Acoustic Principle	Pressure Gradient
Polar Pattern	Cardioid
Frequency	Rate: 40 Hz to 20 kHz
Frequency Range	High Pass Filter: 0, 75, 150 Hz
Level	Variable: -10, 0, +20 dB
Output Impedance	200 Ω
Signal to Noise Ratio	82 dBA SPL (as per IEC 651)
Equivalent Noise	12 dBA SPL (as per IEC 651)
Maximum SPL	143 dB SPL
Sensitivity	-32 dB re 1V/Pa (25 mV @ 94 dB SPL) ± 2 dB @ 1kHz
Dynamic Range	131 dB SPL
Power Requirements	9 V alkaline battery or P48 (via miniXLR)
Output Connection	Unbalanced: 1/8" (3.5 mm) stereo mini jack plug (dual mono), tip = left channel, ring = right channel Balanced: Mini XLR (TA3F style connector) pin 1 (ground), pin 2 (+), pin 3 (-)
Battery Life	30 hours
Dimensions (L x W x H)	4.6 x 4.0 x 3.9" (118 x 102 x 100 mm)
Weight	11 oz (300 g)

 

For capturing audio the Stereo VideoMic X by RODE Microphones offers professional quality. It can be used as an on-camera mic in various environments, for applications such as interviews, weddings, sports and nature shoots, and more. It features a matched pair of 1/2" condenser capsules configured in a stacked X-Y configuration with cardioid polar patterns, a 40 Hz to 20 kHz frequency response, and 9V battery or 48V phantom power. It is built with a balanced mini XLR (TA3F) output connector, and an unbalanced 1/8" output stereo mini jack plug. The Stereo VideoMic X can deliver professional-grade audio and gets the job done when capturing audio in various environments.

The VideoMic features digital switching on the rear that allows the user to control level adjustment, high-pass filter, and high-frequency boost to increase intelligibility of dialogue. The enclosure is constructed of a lightweight aluminum, and, inside the enclosure, the capsules are supported by the Rycote Lyre shock-mounting system, providing isolation from vibration as well as knocks and bumps. In addition, a pop shield and wind shield is included.